Ausschreibung

European XFEL: Superconducting undulator modules for an afterburner for SASE2 - FESTA

Angebotsfrist

07. Dez 2026, 13:00

Geschätzter Wert

Nicht angegeben

CPV-Code

38000000

NUTS-Region

DE600

Zweck

European X-Ray Free-Electron Laser Facility GmbH (European XFEL) is a non-profit limited liability company under German law. It operates the world’s largest X-ray laser, a 3.4-kilometre-long facility from the DESY campus in Hamburg to Schenefeld in Schleswig-Holstein. The laser generates ultrashort X-ray flashes 27,000 times per second, with a peak brilliance a billion times higher than that of the best conventional X-ray sources. The European XFEL is announcing a tender for the development and supply of superconducting undulator (SCU) modules as part of an afterburner project for the Hard X-ray line SASE2. This project will comprise a small series of SCU modules, with one module retained for measurement-system improvements and as a spare. The modules are designed to produce X-ray lasing at photon energies of ≥ 25 keV while operating at an electron beam energy of 16.5 GeV.

Lose 1 Los
Los 1

European XFEL: Superconducting undulator modules for an afterburner for SASE2 - FESTA

Kennung LOT-0001 UNS-CT37954

Scope of Work After Award: The tender covers the following components and requirements: Superconducting Undulator Modules: Composition: Small series of five with an option of sixth SCU module, each approximately 5 meters long. Installation: The SCU modules will be positioned after the existing 35 permanent magnet undulator modules of the SASE2 line at European XFEL Technical design report: A Technical Design Report (TDR) for one representative SCU module must be provided after award to EuXFEL for review and approval Tests: An intermediate test of all the SCU magnets in a liquid-helium (LHe) vertical cryostat at DESY (SUNDAE1), carried out under the responsibility of EuXFEL, is foreseen to train and characterize the magnetic field. The acceptance tests of each SCU module include: factory acceptance test (FAT) and three site acceptance tests: the first SAT which includes magnetic characterization, SAT2 in the tunnel without beam and SAT3 in tunnel with beam. Timeline: The fifth SCU module must be delivered latest by June 2032, and the sixth optional SCU module, if the option is exercised, latest by June 2033. Technical Specifications include: Magnetic Configuration: Each SCU module consists of two 2 m long SCU magnets, each with: Vacuum stay-clear: 5 mm Period: 18 mm Peak magnetic field: ≥ 1.82 T The root mean square of the relative variation of the undulator parameter defined over half period must be smaller than 0.004 The range of the relative variation of the undulator parameter defined over half period must be smaller than 0.012 Shimming coils must be applied in case the undulator parameters mentioned above are not reached in the measurement in SUNDAE1: root mean square of the relative variation of the undulator parameter defined over half period larger than 0.004 and /or the range of the relative variation of the undulator parameter defined over half period larger than 0.012. Components: - A cryostat for thermal isolation consisting of a vessel and several thermal shields. - An electron beam vacuum chamber (EBC) with the following functions: separating the isolation vacuum, where the superconducting magnets are located, from the ultra high vacuum where the electron beam moves, shielding the superconducting magnets from beam heat load. - Two SCU magnets, each consisting of a top and bottom coil held together by a support structure, equipped with correction coils. - Horizontal and vertical Helmholtz coils at the exit of the upstream SCU magnet and at the entrance of the downstream SCU magnet. - A phase shifter to manage phase mismatch between the two SCU magnets. A support structure holding together the Helmholtz coils and the phase shifter. This support structure and the ones of the SCU magnets must keep the superconducting magnets at the final gap and have to be designed and manufactured to fit in the magnetic gap precisely machined rails to guide a sledge with Hall probes. The sledge with Hall probes will be provided by EuXFEL. This is needed to perform the test in SUNDAE1 mentioned above. The contract will provide for a firm obligation to supply five (5) SCU modules. In addition, the contract will include an option entitling EuXFEL, at its sole discretion, to order one (1) additional (sixth) SCU module with the same technical specifications and on the same contractual terms. The option shall lapse if EuXFEL does not exercise it by the end of July 2029. EuXFEL is under no obligation to exercise the option. Further details will be set out in the procurement documents, including the complete technical specification, which will be provided to the selected candidates following completion of the selection stage and submission of the confidentiality agreement.

CPV-Code
38000000
Angebot einreichen
Eignungskriterien 3 Einträge

Referenzen über vergleichbare Bauleistungen

TL: List of references concerning the performance of services comparable to the contract to be awarded (self-declaration) over the last 15 years (cut-off date: 1 November 2011). For this purpose, the applicant must use the forms (application documents) provided by the contracting authorities. Please attach descriptions of the respective contracts from which the comparability of the reference with the contract that is the subject of this procurement can be derived. In the case of applicant consortia, corresponding information may be provided for the applicant consortium as a whole. The contracting authority may require the submission of reference certificates issued by the respective reference clients. Minimum requirements for the references: evidence of at least two comparable references from the last 15 years (cut-off date: 1 November 2011). Where more than three applicants meet the suitability criteria, the contracting authority will rank the qualified applicants against each other solely on the basis of the references submitted under TL in order to select the candidates to be invited to submit an initial tender. For this purpose, the criteria PL1, PL2, PL3 and WL will not be evaluated. The information and evidence listed under TL are used to assess the references. A maximum total of 100 points can be achieved here. The evaluation of technical and professional ability is carried out in a relative comparison of the applicants with each other on the basis of the following scale/grade levels. - 100 points = very good: Applicant meets the requirements with regard to the suitability criterion to the very highest degree, - 80 points = good: Applicant meets the requirements of the suitability criterion to the highest degree, - 60 points = fully satisfactory: applicant meets the requirements of the suitability criterion to a high degree, - 40 points = satisfactory: applicant satisfactorily fulfills the requirements with regard to the suitability criterion, - 20 points = sufficient: the applicant meets the requirements of the suitability criterion to a just sufficient degree. In the range between 0 points and 100 points, intermediate grade levels can be formed (10points, 30points, 50points, 70points, 90points) to take into account a tendency towards the higher grade level in each case. An evaluation of a suitability criterion (technical and professional ability) with 20 points or less would correspond to a complete non-fulfillment of the respective suitability criterion, which would result in the exclusion of the participation application (knock-out criterion). These are suitability criteria, not award criteria. If several applicants achieve the same total score and the number of applicants exceeds the planned number of bidders to be invited to negotiate, European XFEL reserves the option to draw lots for the negotiation procedure among the remaining applicants with equal scores. The criteria will be used to select the candidates to be invited for the second stage of the procedure Weight (points, exact): 100

Losbezug: LOT-0001 UNS-CT37954

Eintragung in ein Berufsregister

The documents which the applicant must enclose with its application to participate are listed below. For this purpose, the applicant must use the forms (application documents) provided by the contracting authorities. Submitted supporting documents must still be valid; insofar as requirements are made regarding up-to dateness, the date refers to the date of publication of this notice. In the case of applicant consortia, the suitability requirements PL1 to PL3 listed here apply mutatis mutandis to each individual member of the applicant consortium. Reliance on the capacities of third parties is excluded in respect of the evidence required under PL1 to PL3. With their request to participate, applicants must submit the following documents: PL1. Self-declaration regarding exclusion criteria (Sec. 123, 124 GWB). A form is included in the application documents. PL2. Self-declaration on the company with information on the company name, legal form, registered office, object, management of the company, company structure (e.g. parent companies, group affiliation, branches - organization chart), with presentation of the company and capital relationships of the applicant and, if applicable, the responsible branch office and query on SME status as well as beneficial owner(s) of the company. PL3. Self-declaration on the EU packages of sanctions implementing Article 5k, paragraph 1 of the Council Regulation (EU) No 833/2014 (“RUS sanctions”). A form is included in the application documents. In the case of applicant consortia, the evidence must be provided by each member of the applicant consortium.

Losbezug: LOT-0001 UNS-CT37954

Durchschnittlicher Jahresumsatz

WL. Self-declaration concerning the economic and financial capabilities of the applicant, in particular statement of total turnover of the applicant of the last 3 financial years. The form in the application documents shall be used. In the case of applicant consortia, the evidence can be provided for the applicant consortium in total. In the case of a loan of qualifications, particularly where subcontractors are involved, the relevant supporting documents must be submitted for the relevant companies. If an applicant is unable to provide any required evidence for a valid reason, it may demonstrate its ability to perform by submitting other appropriate evidence. EuXFEL reserves the right to request further self-declarations and certificates for applicants selected at the end of the call for competition and any subcontractors upon separate request with the submission of the offer. EuXFEL reserves the right to obtain financial information on the applicant

Losbezug: LOT-0001 UNS-CT37954

Ausschlussgründe 1 Eintrag

Ausschlussgrund

[ Compulsory or facultative grounds for exclusion pursuant to Sections 123 to 126 GWB ] With regard to the grounds for exclusion, the provisions of the self-declaration on the non-existence of grounds for exclusion, which is part of the application documents, apply.